The size of the sound can not be ignored before installation

The poles equipped with audio manufacturers are generally the same size, and the decoration company often does not consider the different design of each conference room on the installation of audio. This involves another situation, if your conference room has a background wall, the general thickness of the background wall has an average of 35mm, but the sound is not a flat object, but a three-dimensional front and back. When there is not enough distance between the sound and the wall, it cannot be installed. If the audio supplier and the installation team can not communicate this problem in time before the renovation, the consequences are still very troublesome, and all the audio hangers must be taken down and re-drilled.

The sound is hung at the correct and appropriate Angle in order to maximize the utility. The more popular installation method is that the four speakers in the conference room are all located in the front of the conference room according to the level of relief and different angles.

Sound installation method

Stand at the middle point of the conference room, centered on the place of the station, like the extension of the sound on both sides, the diagonal is roughly 45° Angle for the appropriate position.

In addition, note that the stereo is recommended to rotate around 360° and tilt down slightly after hanging. In this way, any Angle setting can be adjusted in future use, and the sound effect of each orientation is different